Tile cutting is a very difficult job and if you do not know how to do it you will end up breaking and wasting a lot of tiles.
To cut tiles like a pro and give it a look like professionals you can use wet tile saws.
It makes the job easy and wet tile saw is not as complicated to use as a normal saw.
Following Few tricks and techniques you can cut tiles like a professional.
There are many wet tiles saw available in the market but if you are looking for something at a reasonable price, we are listing some the best wet tile saw under $300 below.
You may also like: Best Angle Grinder for Metal Work
Table of Contents
Differences Between wet tiles saw vs dry tile saw
Normally most of the installers use a wet tile saw to cut tiles because it’s easier.
Wet tile saw has a blade covered in little diamonds which spins so fast to cut the tile. The water in the wet saw keeps the blade and tile cool.
Wet tile saw gives you so much advantage when you cut a lot of tiles together.
If you once get to know about the technique of how it is used you can be a pro.
The water keeps the temperature of the blade normal thus its makes it easier to cut the tiles.
On the other hand, dry cutters are different and these have many varieties of forms. These are good for small jobs and best for mosaic tiles.
If you are planning to cut too many tiles with it then you should not use dry saw because it has higher chances to break all of the tiles.
You have to be very tricky and when you use the normal cutters.
You have to line up first, then cut the tiles slowly. In this case, wet saw tiles are easy to use and cut.
It gives the cutting a professional look as well.
5 Best Wet Tile Saw Under $300 Review
Let’s start!
1. SKIL 3540-02 7-Inch Wet Tile Saw
SKIL 3540-02 7-Inch Wet Tile Saw is one of the best-wet tiles saw for cutting and replacing tiles. Its stainless steel top supports 12×12 inch tiles.
The cooling reservoir keeps the blade cool and reduces the dust while cutting tiles.
It gives 0-45 degree bevel which will give you flexibility for various types of cuts.
After a few cuts, you have to refill the water. You can cut tiles for DIY applications as well as it has good beveling capacity.
The machine does not come with any battery. It has a plug and you have to plug it in and it will start working.
Easy to use and leaves smooth edges to the tiles after cutting it.
It is very lightweight and reasonable in price. So if you are searching for a quality saw then this is one the best-wet tile saw under $300 you can get for yourself.
Pros
- Very Lightweight
- Fence is adjustable
- Reasonable price
Cons
- Some say it’s too loud
- You have to refill water after few cuttings continuously
2. SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Container
This product is another good tile cutting saw under $300 with hydrolock water containers.
It has an aluminum tabletop and extra side space for big tiles.
The hydrolock water container reduces the dust and cleaning time. It also helps to finish your work faster.
The water container is big enough so you do not have to fill water more often.
It does not make a mess at all so you do not have to go outside and cut your tiles.
The bevel cuts tiles to 0-45 degrees which means it is very flexible. This also has a diamond blade which gives you efficient and professional cutting.
Leaves the tiles edges smooth and cuts up to the mark. You can cut 18×18 inch tiles easily with this saw machine. It is also lightweight, electric, and easy to use.
If you are a beginner you can easily use this saw. Just learn the basic steps on how to use it and follow the steps properly and carefully.
Pros
- Very strong body
- The motor is not noisy
- Cleans easily
- Cuts tiles smoothly
Cons
- Clamping seemed weak
- The fence was a little bit difficult to adjust
3. SKIL 3601-02 Flooring tile saw with 36T Contractor Blade
SKIL 3601-02 Flooring Saw is very lightweight and gives smooth and easy cuts to solid and laminate flooring.
Professional users suggested this saw better than the table saws. According to them, this one is the best-wet tile saw under $300.
For the lightweight and size, you can take it any place or spot and work with it there. It also gives 0-45 degree flexible and smooth cuts.
So you can give any shape or size to your tiles and do DIY works as well.
The blade has good cutting capacity so you can cut any type of material with it. It will not leave the edges sharp at all.
It is also portable like the other saws we listed above. You just have to plug it and it will start working.
If you are not a professional then you should be very careful while using it.
Pros
- Portable
- Easy to use and set up
- Gives smooth cuts
- Better than table saws
Cons
- One-sided, not reversible
- Not good for complex cuts
4. QEP 22650Q 650XT 3/4 HP 120-volt Tile Wet saw
QEP 22650Q 650XT is a very powerful wet saw that generates up to 3600 RPM for cutting ceramic tiles, porcelain tiles, marble, and stone.
You can cut in various ways and give good shapes and size to your tiles as it tilts for 22.5-45 degrees.
The saw is very durable and the rubber pads make it very much stable. The water circulation system keeps the work area dry and reduces mess.
The motor makes every cut smooth and efficient, gives your tiles professional cutting look.
It is also lightweight and portable. So, you can carry it anywhere and make your job done.
DIY workers can easily use this as it is very simple and easy to use.
It has all the basic features you need and it’s very cheap.
Pros
- Very lightweight
- Good stability because of rubber foot pads
- Portable and easily handleable
- Cleans easily
- A meter gauge is given
Cons
- Fence sometimes gets hard to line up
- Blade stalls out
5. PORTER-CABLE PCE980 Wet Tile Saw
PORTER-CABLE PCE980 Wet saw is a very quality product at a reasonable price.
You can cut different types of tiles, stones, marbles, and ceramic tiles with it smoothly as the blade has good cutting capacity.
The water basin helps to keep the working area dry and clean. You can cut 12×12inch tiles easily with it.
It is portable and lightweight so you can easily carry it anywhere.
The water space is big enough so you don’t have to fill it more often.
The rubber foot pads will give you enough safety while cutting tiles so don’t worry about it. Still, you have to be careful enough while working with it.
You can get these tiles cutting saw as it has many good features which will help you do your work easily and give it a professional look.
Some tips and tricks will help to cut tiles like a pro with this saw.
This is one the best-wet tile saw under $300.
If you work for long projects then this is the best tile saw for you. Preserve it well after you are done and it will give good performance for a long time.
Pros
- Accuracy is very high
- Reasonable in price
- Water basin keeps the working area dry and clean
Cons
- Some say it’s not the best option in this price range
What does a tile saw do?
A tile saw is an equipment that is used to cut tiles or install tiles. Not only tiles you can cut stones, marbles, and ceramic tiles with some tile saws too.
It has a blade that helps to cut tiles smoothly and easily. For better results, you have to know the using process properly.
Depending on what type of tile you are going to cut, you have to buy your saw machine. A tile saw is easy to use and gives professional cut looks to your tiles.
If you want to install tiles in your new home on your own you can use a tile saw if you know the tricks of how to use it.
It minimizes your cost as well and you can store the machine to use later. It takes very little space to use so you can use it anywhere you want.
Every mechanic nowadays uses tile saw for easy cutting as it saves a lot of time and decreases the chances of damage.
Few Things to Consider Before Buying a Wet Tile Saw
Cutting capacity
Every tile saw has a different type of cutting capacity. So you have to choose a saw by what you are going to cut with it for getting the best result.
Many cut normal tiles and do DIY works so for them a normal cutting saw is good enough with good beveling capacity.
But if you are planning for longer projects and cut hard tiles like ceramic or marble tiles then you should buy a saw with good cutting capacity.
It will leave your tiles edges sharp and you will end up breaking your tiles.
The right saw machine will make your job easy and save your time.
Table saw vs floor saw
Both tables saw and floor saw has its advantages. But you will not get any extra benefit from it.
Table saw needs space to work on but it reduces the mess that can create on the floor.
On the other hand, floor saws need no space. You can use it anywhere you want, also in the place where you are going to install the tiles. Both of these are easy to use and handle.
If you have less space and a lot of tiles to cut then we suggest you buy the floor wet tile saws as it saves space. The water in the basin reduces the mess as well.
Beveling capacity of the machine
A saw with a good beveling capacity allows you to cut tiles in various sizes and shapes. So before buying a saw machine check the beveling capacity of it.
Mostly every tile saw has 0-45 degree beveling capacity.
For DIY cuts you need a saw with good beveling capacity else you will not be able to give it good shape and it will break.
You can have flexibility in your work if you buy a saw with a good beveling capacity.
So this is also one important thing you have to consider while buying a wet tile saw.
Professional cutters also suggest buying a saw with good beveling capacity as it is easy to use and cut.
Blade
The most important thing about your machine is the blade that will cut your tiles. A good blade is very important as it will help you to make you easy and give you smooth cuts.
Some tricks and trips can help you cut your tiles like a professional.
If you are going to cut normal tiles then a normal blade is good. But if you are planning to cut stones, ceramic tiles or marbles then you need to buy good quality and sharp edge blade.
Diamond blades are best in this case as it leaves no sharp edges on your cut.
And make sure you use a wet tile saw because the water decreases the heat of the blade thus your materials will not break easily. So, buy a tile saw that has a quality blade.
Learn How to Use a Wet Tile Saw
Wet tile saws are easy to use if you know the right way and some tricks to use it.
Wet saws are slightly different from normal saws. There are some steps you need to maintain which are,
- Filling the water reservoir and connect the water with the saw
- Mark your tile and place it away from the blade properly
- Turn on the switch
- Push your tile towards the blade slowly
These are the main steps of using a wet saw. Let’s talk about it in details for clear understanding,
Firstly, you have to fill up the water reservoir. The water helps to keep the temperature of the blade normal and keeps everything dry and clean.
Then plug in the wire of the machine and turn the switch on. But remember don’t put your tile under the blade in the first place. Just turn it on without putting the tile.
Secondly, take your tile, mark, and measure it properly. Without marking you can forget where to cut and end up wasting tiles.
So it’s better to measure and mark before you start cutting your tiles. Make sure you marked it where you want to cut it.
Then place the tile away from the blade on the table. After that slowly push the tile to the blade.
Do not rush while pushing your tile because it can break your tile. So push it slowly and yes make sure you are placing the marked place of the tile on the blade.
Then the blade will start cutting the tile and push it slowly till it cuts your tile fully.
When you are done cutting don’t pull the saw up without turning off your switch.
Else the water will splash everywhere and it will be a mess. These are some little tips you need to remember for working efficiently.
Lastly, take the pieces and clean them with a piece of cloth.
In this way, you can cut tiles, ceramic tiles, marbles, and stones as well.
You have to be very careful while working until the very last moment. Make sure your water connects with the saw properly and do not rush while cutting your tiles.
Make sure the blade is good enough for your material. Following these steps, you can cut tiles like a professional easily on your own.
Frequently Asked Questions
Q. What type of blade will give the best result?
It depends on what you are going to cut with the blade. If you want the best results then you need to know about the features of the blade and its use on materials properly.
A diamond blade is good for all type of material cutting. It gives every cut a professional and smooth look.
However, only the blade will not give you good results if you do not know how to use it. So knowing the tricks of using a saw is important for better results.
Q. How can I make my wet tile saw last longer?
If you want to make your tile saw last longer then, first of all, you need to buy the right tile saw machine and cut the materials that only can be cut with that.
And you have to work with it in the right way and lastly preserve it after you are done working.
Conclusion
Nowadays everyone likes to do their work on their own if it’s possible. Installing and cutting tiles is a very hard and tricky job.
No one used to think of cutting tiles on their own before these machines were introduced.
But now if you have a good tile saw machine and know some tricks and the using process you can cut tiles on your own for your home.
It will save your money and you can use the machine later as well wherever you need to install or cut tiles.
I hope this article helps you to get the best-wet tile saws under $300 for you.
