Table of Contents
Best Angle Grinder for Metal Work Review To Choose the Right One
Are you looking for a good angle grinder for cutting metals? If yes, then this article is for your help!
There are many angle grinders but not all of them will give you good cuts.
For good and professional-looking cuts, you need good quality angle grinders.
And from brand to features everything needs to be considered before choosing one.
Below we are giving you some names of best angle grinders for metal works with feature details.
Also dropping a buying guideline consisting of the things you need to consider before buying an angle grinder.
Top 5 Angle Grinder for Metal Work Reviewed!
Let’s start!
1. DEWALT DCG413B 20V MAX Brushless Cut Off Grinder
The DEWALT DCG413B 20V angle grinder can deliver 57% more run than other angle grinders as it has a brushless motor.
The productivity of this angle grinder is unbelievable.
It will give you professional looking cuts faster and smoothly.
It has the best angle grinder cutoff wheel which helps to give every cut professional look.
The motor will offer you a no-load speed of 9000 max RPMs. So, you don’t have to worry about the load speed at all.
Also, easy to use because whenever you release the paddle switch the blade will stop. It has the best angle grinder wheel for cutting metal.
As it has a brushless motor you don’t need to change the brush more often.
The angle grinder is lightweight and feels comfortable in your hand for the ergonomic handle.
It will come with a battery and also a charger sold.
From professional to beginners everyone can use this as it’s super easy to use. Just be careful when you use it.
DeWalt will give you 3 years of warranty for it. Use it properly and it will survive longer than that.
Pros
- Good battery life
- Great power at affordable price
- Very comfortable to use
Cons
- The safety trigger is difficult to push back
- The dirt easily plugs in into some places
2. Makita 9557PBX1 4-1/2″ Paddle Switch Cut-Off/Angle Grinder
This one is another good angle grinder for cutting metals easily and faster. It has an Extra-large wheel which is perfect for high volume or long works.
Easy to use and has a lock on the switch which helps you to maintain continuous operation. You do not have to worry about the working buttons.
Good quality product at a reasonable price. You can cut concrete easily with this grinder.
Thus, it is said to be the best angle grinder for cutting concrete.
It comes with an AC/DC switch for an alternative power source. And has an extra-large paddle switch.
The only thing which is a disadvantage of this angle grinder is the weight. It is heavier than the other available grinders.
However, it works great and is one of the best angle grinders for metal works.
Many are comfortable using a heavy angle grinder and this is the best option for them.
If you search for corded angle grinder reviews you will be suggested this one.
The design of the machine helps to prevent the dust from going inside the electrical components.
It comes with a kit where you will have the angle grinder wheels, metal tool case and Makita diamond blade.
The diamond blade helps to cut and give a professional look to metals.
Pros
- Reasonable price
- Extra-large wheel
- Good for high volume works
Cons
- A little bit heavy than the other angle grinders
3. PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 7-Amp
PORTER-CABLE Angle Grinder 4-1/2-Inch, 7-Amp is mainly made for hard and aggressive jobs.
The motor delivers up to 11000 RPMs for tough metal works. Thus, this is an ideal angle grinder for contractors, welders, or others who needs to do hard metal works.
It is one best angle grinder for tile cutting as well. You can take it anywhere as it’s portable and easy to handle.
And it has a non-locking paddle switch for control and safety.
The cast metal gear case used in the machine makes it durable. It is very lightweight and comfortable because of the 3-position side handle.
As it’s very lightweight and easy to use, anyone can use it.
For professional tough works, this is one best angle grinder.
It comes with a 3year warranty and free servicing as well.
So, if you are finding an angle grinder for hard or tough work then go to the market and buy this one.
Pros
- Good for job site works
- Very lightweight
- Comfortable
Cons
- Cut off wheels are not that much efficient
4. DEWALT Angle Grinder Tool, Paddle Switch, 4-1/2-Inch
Dewalt serves the best products when it comes to a quality product.
It is one of the most powerful angle grinders ever. Mainly made for heavy-duty works.
The motor is powerful and generates 12000 rpm which gives faster cuts than any other angle grinder.
So, you can do heavy-duty work and cut any type of metal with it easily.
The grinder has a 2-position side handle which makes it easy to use and control. It is also lightweight and comfortable.
You can easily remove the wheels without any tool removal.
Protects the dust going inside the tools which makes it more durable.
A hex wrench is given with the box.
Professionals widely use DEWALT Angle Grinder. They say this is one best angle grinder available in the market.
Pros
- Very lightweight
- Great construction
- Protection from dust
- Perfect for worksite
Cons
- No protective case is given in the package
5. Metabo – 5″ Variable Speed Angle Grinder
This grinder is full of features and very high in quality. It has a very long battery life and the wheels work so fast.
You can cut metal or other hard materials easily.
It is also one best angle grinder for concrete. It has a 13.5-amp motor, you can guess how powerful this is!
Every tool used in this angle grinder is tough. It will give you a smooth start every time. We strongly recommend you to use this tool.
It is very lightweight and easy to handle. You can take it anywhere and make your work done. It gives you proper safety while using it.
So, don’t worry about safety.
It is affordable in price than other angle grinders. They will give you a three years warranty.
At such a reasonable price you can never get this top-quality tool.
It is one best angle grinder for metalwork. Being a Beginner, you can also use this following the steps properly.
It can build your skills faster than other available angle grinders.
Pros
- Very Affordable
- Motor protection is ensured
- The motor provides higher overload capacity
Cons
- The spindle is too long
- The wheel is smaller than other tools
Things to Consider Before Buying the Best Angle Grinder for Metal Work
Disc/wheel and its size
There are many angle grinders with different disc sizes from small to large. The common sizes are 4-1/2 inch, 5 inches, 6 inches, 7 inches, and 9 inches.
However, 7 inches is said to be the ideal and standard size for cutting anything.
Depending on what you want to cut you have to choose the disc size.
If you cut deep and large surface then you should buy a bigger disc size angle grinder.
It will be easier to cut and safe to use. Bigger disc size will give better performance on the large surface than the normal-sized ones.
Also do check the disc’s rotation per minute. The more it rotates per minute the more effectively you can work.
Vacuum attachment inside Machine
Grinders make a lot of dust while cutting materials. This dust can go inside the machine and harm the tools.
Many grinders have an inside vacuum which helps to reduce the dust on its own. So the dust cannot go inside the machine.
Mostly everyone buys grinders which have a vacuum inside it. It helps to reduce dust besides increases the durability. So it is better to have one with a vacuum.
Movable side handle
If you are working with something and it’s not comfortable, will you be able to continue working?
This is why comfort is one important thing. The movable side handle makes it easier to handle and work for a long time.
This helps to move the Grinder right to left. So you can work in different positions and have great control over it.
Handles also have the anti-vibration feature. We will suggest you buy one that has this feature.
It will reduce vibration and let you work properly.
Motor speed
The more power the motor generates the fast you can do metal cuts. Metal is hard to cut. But a grinder having a good power helps to cut metal easily.
Depending on the work you have to choose the motor power. Before buying one you should decide the kind and power it needs to cut your material.
For time saving and fast work, you have to buy a good power motor. But don’t worry about safety. All are made with full safety for your protection.
Power
You can power an angle grinder in three ways. You can use electricity, petrol or compressed air.
An electric grinder can stop working if the charge runs out.
So you have to charge it often before you use it for work.
The petrol ones are easy to use. You just have to refill the machine.
Both have their advantages and disadvantages. You should buy depending on what you think is better for you.
Quality of the machine
Always buy a quality product over anything. Now you can think good quality products will be high in price.
Then you are wrong. Many famous brands produce a quality product and have a reasonable price.
If the quality is not good it will be not durable at all. It will stop working properly and lead you to buy a new one.
So, it is better to buy a quality angle grinder in the first place. Else you cannot cut metal properly because the metal is hard to cut.
There are many High-end brands in the market. Try to find out their quality angle grinders.
It will make you efficient and give you proper safety as well.
Frequently Asked Questions
Q. Which size disc should I get?
Depending on what you want to cut you should decide the size. There are many sized discs available in the market.
But the ideal size of an angle grinder is 7 inches. But if you are planning to cut long and deep surface materials then buy a bigger sized disc.
It will help to cut effectively. And for normal size metal works, you can get a normal disc side grinder.
Q. What is an angle grinder for and why it is different from the other grinders?
There are many types of grinders. Angle grinders or side grinder is used mainly for grinding and polishing.
It is more versatile and not only for cutting. It can be used for polishing and grinding. The normal grinders only cut materials.
Q. How to make them last longer?
You need to know the use of it to make it last longer. After every use store it properly.
Clean the dust that occurs while you cut. Or buy a grinder that already has a vacuum inside it. It helps to reduce the dust.
And do not use the grinders without knowing the features of it. Taking good care, you can make it last longer easily.
Conclusion
An angle grinder is a basic thing every worker needs who works with metal. For getting the best output it is important to get the best product.
Finding the best angle grinder is easy if you know the features of it.
And you can get the best output if the grinder suits you. Metal to every other material can be cut with a good quality angle grinder.
And we hope the angle grinders we listed helps you to find your one. We listed the best angle grinder for metalwork.
If you get confused to give a try to the ones we listed above.
